SELECTION GUIDE
The below mentioned Anodes are designed and manufactured by TTCI as per customer specific application and also we assist you with any question regarding your specific application

Our TTCI (Titanium Tantalum Components Industries) ANODES are using in different industries in different shapes for different application, they are as follows

The MMO coated Titanium anodes, an oxidizing film naturally passivates the titanium substrate, the Titanium anode remains dimensionally stable over time. Direct current transfer is accomplished through the mixed metal oxide catalyst , which is highly conductive and fully oxidized so that higher current outputs are possible ( approximately 10 amps / ft2 in fresh water and over 50 amps / ft2 in salt Water). This two-part composition allows for a maximum current density and it can be used with various levels of moisture and salt contents , acid environments with extremely low pH levels (under 1) and high chloride concentrations. It can be designed to provide effective protection for 6 years and more , i.e. the mixed metal oxide coating on the anodes has an almost negligible consumption rate of less than 1.0 mg / amp-yr.

PLATINIZED TITANIUM ANODE

PLATINIZED TITANIUM (Ti ) PLATE ANODE & PLATINISED NIOBIUM ( Nb ) PLATE ANODE
PLATINIZED Ti MESH ANODE & PLATINIZED Nb MESH ANODE
PLATINIZED Ti TUBULR ANODE & PLATINIZED Nb TUBULAR ANODE
PLATINIZED Ti WIRE and ROD ANODE & PLATINIZED Nb WIRE and ROD ANODE
PLATINIZED Ti DISK and STRIP ANODE & PLATINIZED Nb DISK and STRIP ANODE

Platinized Titanium Anode is an absolutely vital element for wet electro deposition of precious metals like Gold, Rhodium, Platinum, Palladium and nonferrous metals like Chromium, Nickel, Copper and Zinc. We offer Platinized Titanium Anodes in any size in the maximum of 1.2 sq.mtr.(1.2 metre X 1.2 metre) in single piece. Titanium plate, mesh, wire, rod and Niobium, Tantalum can also be platinized for various applications. We can do the coating thickness from 0.5 micron to 15.0 micron as per customer application and request.

PLATIZED NIOBIUM ANODE
Since the Niobium substrate is resistant to corrosion, the anode remains dimensionally stable over its operating life and consumption of the Platinum costing is extremely low (40 to 80 mg / amp-yr.).Because of its low consumption rate, the anode may be employed in a protection system to achieve a design life of 6 years and above. Platinized Niobium Anode is highly conductive and can be operated at a maximum current density of 100 amps/ft2. The anode is also Very light weight, flexible and strong. Platinized Niobium Anodes are designed for use in all types of aqueous storage and process equipment. The anode has proven to operate effectively in fresh, brackish and salt water and is not adversely affected by Chloride concentration.

ANODES FOR IMPRESSED CURRENT CATHODIC PROTECTION

Mixed Metal Oxide (MMO) coated Titanium Tubular, Ribbon, Probe, Mesh, Wire, Strip, Disk & Rod Anodes. Platinized Niobium & Titanium Wire, Mesh, Probe & Strip Anodes. Platinized Disk Anode for ICCP of Ship & Marine structures.

APPLICATION:
Electrodialysis - in waste water treatment, water conditioning and the synthesis of organic compounds. Cathodic protection of various structures like offshore, ships, reinforcement bars, concrete. Wet electro deposition of precious metals like Gold, Rhodium, Platinum, Palladium and Non-ferrous metals like Chromium, Nickel, Copper, Tin, Cobalt & Zinc. Production of Chlorate, Perchlorates, Chlorine/Caustic Hypochlorite. Electrolytic production of Chromic acid and Hydrogen from water. Electrochemical cleaning of electronic components. Electro-galvanising of Steel strip and electrolytic metal rec. Electrophoresis.

MATERIAL OF CONSTRUCTION & SPECIFICATION
Substrate   : Mesh, Ribbon, Strip & disk - ASTM B 265 & 393
                  Wire & Rod - ASTM B 348 & 392
                  Tube - ASTM B 337/338 & 394
Catalyst     : Ruthenium, Iridium, Platinum, Rhodium and Palladium

FEATURES
By using TTCI Electrodes (Anodes&Cathodes) economically saves on
Substrate: A one time investment Electrodes can be recoated for a fraction of what it would cost to replace worn-out conventional Electrodes.
Labour: With TTCI Electrodes, the sludge commonly encountered with conventional Electrodes, e.g. Nickel, Lead, Steel and Magnetite, is virtually nonexistent, saving you the cost of labour intensive sludge removal as well as the disposal cost.
Manufacturing: As Electrodes are Titanium based, there is no build-up of Lead and other heavy contaminants.
Environmental Liability: Electrodes are environmentally friendly, no hazardous waste sludge is produced.
Energy: Lowering in current voltage to extent of 0.4 - 0.5V leading to 10-15V saving in energy consumption.
Production Cost: High corrosion resistance of electrodes makes for long lasting performance.

TTCI ANODES are manufacturing as per customer design or as per customers specific application with the base metal of TITANIUM or NIOBIUM according to the application of the customer .Our well equipped and qualified engineers are to offer

QUALITY
QUANTITY (small or more)
DELIVERY
COMPETITIVE PRICING
PERSONALIZE FRIENDLY SERVICE
SPECIAL MANUFACTURED TO YOUR EXACT SPECIFICATION
MATERIAL SPECIFICATION AS PER ASTM STANDARD
TEST REPORTS FOR BASE MATERIALS
SPECIAL PACKAGING AT YOUR REQUEST

Our quality management team prides itself on assuring you, the customer with total peace of mind. Our extensive inventory of quality anodes, our dependable precise and timely service makes the difference.

We can also do the REPAIR, RECONDITION & RE-COATING of the above said ANODES according to the customer specific application like Mixed Metal Oxide and Platinum coating.

ELECTROLYZER (Electrolytic Cell) :

For an example: Model - TTCI Chlor 140
It is an onsite Sodium hypochlorite Generator that generates active Chlorine onsite, from brine or salt water. As a disinfectant, sodium hypochlorite performs as well as Chlorine but it is far less hazardous. To using our unique Titanium Anode and Titanium Cathode & patented electrochemical processes, we produce the system having capacity to produce active Chlorine 25gm/hr to 100gm/hr. Our multi-strand TTCI Chlor 140 can produce the Chlorine up to 300gm/hr.

Technical Specification
Chlorine out put capacity per hour : 0.140 Kg.
Type of process : Continuous
Strength of Hypo : 7 - 8 GPL
Water consuming per 8 hour : 150 Lts.
Salt consuming per 8 hour : 4.5 Kg.
AC current Input : 230 V / 440 V, 50 Hz 15 amps
DC current Output : 100 amps
Max. Disinfectant water flow with 2ppm dose per 8 hour : 280 Cubic Meter.

Our Model - TTCI Chlor 500 having capacity to produce 500gm of active Chlorine per hour and Multi-strand TTCI Chlor 500 can produce the Chlorine 3000gm/hr. And also we can manufacture the Electrolyzer as per customer requirements according to the capacity of the tank or volume of
the swimming pool.

According to varying water capacity, our model getting changed which will be calculated as per volume of the tank and volume of the swimming pool.

FEATURES OF ONSITE HYPO PRODUCTION

• Safe : No hazardous gas to store or handle.
  
• Environmentally Friendly : No hazardous chemicals are used or produced.
  
• Easy to install & operate : The Electrolyzer which connects easily to the storage tank and to standard pool plumbing & the wall mounted Power Pack which controls the operation of the system.
  
• Service : We will provide responsive service for the life of your project.
  
• Customized Electrolyzer : TTCI Chlor is available in a wide range of capacities and also have engineering to builds systems to exactly match your requirements. It is suitable for domestic and commercial application.
  
• Low running cost : Easy to operate and running hours also very less according to the model and seasons like summer, winter etc., it will be varied. We can able to supply the spares of above said systems and also repairing & reconditioning of Electrolyzers of other world leaders.

We must be followed pool water chemistry which should be given ensure the equipment that controls water quality. Also we must be maintained pH level, Salt level and cleaning of Electrolytic Cell which is better and safer for the whole family members' enjoyment, that means there is no irritation of eyes. If you have any questions about any of above said products, what you need please contact us.

Wherever you want Chlorine think of us
Whenever you want chlorine call us

We also manufacture fasteners, hooks, plating racks, jigs & fixtures, plating barrel clamps, shaft and sleeve etc., out of Titanium and Zirconium for metal finishing industries and electroplating industries.

• Hex Socket Cap
  
• Cheese Round Pan
  
• Counter Sunk Head
  
• Hexagon Nylock Castle
  
• Lock Nuts, Cap Nuts, Hexagonal and Hex with Cupped points
  
• Studs and Studding Threads can be cut or rolled

Standard and Non-standard "one-off" products are available ranging from Seamless and Welded pipe fittings like ELBOW, TEE, UNION, COUPLING, REDUCER, HALF-COUPLING, PIPECAP, PLUG, BUSH, NIPPLE, BEND, STUB END, FLANGES AND THREADED FITTINGS manufacturing 1/2" nb to 6" nb

 Fittings are made out of Titanium Gr1 and 2,Titanium 6Al4V-Gr5,Ti-PdGr-7,
Tantalum,Niobium,Zirconium,Hastalloy-B,B2,C276 & 2000,Monel,Inconel,Nickel and it's alloys.